We are searching data for your request:
Upon completion, a link will appear to access the found materials.
After laying the floor, you must now install the plinths. But what are the different styles of laying? Here is the question we are going to solve!
Skirting boards: laying tile alignment
Difficult to achieve, the alignment tile installation results in a small difference in size between the tiles and the baseboards. Not easy then to obtain a perfect aesthetic rendering. This phenomenon is due to the fact that there is always a slight difference between the dimensions of the tiles and baseboards.
Good to know: the offset, even if it is only a few millimeters, unfortunately makes the seal visible.
Skirting boards: installation of offset joints
To avoid the offset of the joints and obtain a graceful assembly, prefer laying an offset joint. The maneuver consists of laying all the lengths of tiles and baseboards at the same time. No more worrying about alignment! Be particularly careful to use this pose there if you have a tiled floor laid diagonally.
Remember that the tile alignment installation and the offset joint installation do not allow an easy disassembly since then the plinths are glued to the wall.
If you are looking for a simple and aesthetic solution, there are also clip-on baseboards. Easy to assemble and disassemble, if you want to do any work, it is the ideal system for beginners in DIY. However, the exposure time is longer and the necessary supplies more expensive.
Skirting boards to be nailed or screwed
Last solution, you can also nail or screw your baseboards directly to the wall. The advantage: the baseboards will be very solid over time. The disadvantages: the installation is more delicate. The nails or screws are also visible, therefore unattractive.
You now know all the advantages and disadvantages of different plinth installations. It is up to you to make your choice !